Nikon Precision | USA & Europe | Global Site

Nikon and Synopsys Collaborate to Deliver Advanced DFM Lithography Solutions for 45nm and Below

Solutions target improved lithography modeling accuracy, reduced time to silicon, and improved manufacturing yield

BELMONT, Calif., – September 20, 2006 – Nikon Corporation, a leading supplier of lithography equipment for microelectronics manufacturing, and Synopsys, Inc. (Nasdaq:SNPS), a world leader in semiconductor design software today announced that they are collaborating on the development and delivery of advanced lithography software models and DFM enabled lithography manufacturing solutions for 45 nm and below.

The Synopsys-Nikon collaboration brings together both EDA design and optical lithography imaging system expertise to focus on building next generation “manufacturing-aware” OPC and RET lithography simulation models. At 45 nm and below, critical dimension (CD) control will be at the single nanometer levels pushing current OPC/RET models and optical lithography system performance to the extreme limits.

Early work will focus on the development and optimization of new advanced lithography simulation models, which can intelligently capture the Nikon lithography system’s proprietary signatures. Leveraging the new manufacturing-aware models and the collaborative expertise gained, future work will focus on the development and deployment of advanced DFM manufacturing in-fab solutions for Nikon lithography systems.

“At 45 nanometers and below, the characterization and integration of both design and manufacturing information is essential,” said Anantha Sethuraman, Vice President of DFM Solutions at Synopsys. “In this new DFM centric landscape, design companies must work together to accelerate time to entitled yield and reduced time to market.”

New lithography simulation and OPC/RET models must be developed to improve CD performance for 45 nm and below. To achieve nanometer level CD control with fast turnaround time, models must be characterized beyond traditional input parameters such as lithography dose, defocus, light source type and lens parameters. New simulation and modeling inputs must include immersion effects, polarization impacts, global and local flare, wavefront aberrations and other factors that may impact CD performance.

“We believe the accuracy of OPC models can be significantly improved and mask qualification time reduced, by incorporating our unique lithography tool characteristics into the EDA software,” stated Toshikazu Umatate, Executive Officer, Precision Equipment Company, Nikon Corporation. “By partnering with leading-edge EDA companies like Synopsys we can provide enhanced imaging performance for our customers.”

About Nikon
Since 1980, Nikon Corporation has been revolutionizing lithography with innovative products and technologies. The company is a worldwide leader in lithography equipment for the microelectronics manufacturing industry with more than 7,800 exposure systems installed worldwide. Nikon offers the most extensive selection of production-class steppers and scanners in the industry. These products serve the semiconductor, flat panel display (LCD) and thin-film magnetic head (TFH) industries. Nikon Precision Inc. provides service, training, applications and technical support, as well as sales and marketing for Nikon lithography equipment in North America. For more information about Nikon, access our web site at www.nikonprecision.com

About Synopsys
Synopsys, Inc. (Nasdaq:SNPS) is a world leader in electronic design automation (EDA) software for semiconductor design. The company delivers technology-leading semiconductor design and verification platforms and IC manufacturing software products to the global electronics market, enabling the development and production of complex systems-on-chips (SoCs). Synopsys also provides intellectual property and design services to simplify the design process and accelerate time-to-market for its customers. Synopsys is headquartered in Mountain View, California and has offices in more than 60 locations throughout North America, Europe, Japan and Asia. Visit Synopsys online at www.synopsys.com.

About Synopsys DFM
Synopsys offers the industry’s most comprehensive design for manufacturing (DFM) solution that spans from RTL to mask. Its DFM product family addresses critical manufacturability and yield issues with its Hercules™ physical verification, Proteus mask synthesis, CATS® mask data preparation, SiVL® lithography verification, i-Virtual Stepper™ mask defect dispositioning, patented PSM technology, and physics-based TCAD suite of simulation products. Synopsys takes a systematic approach to design for manufacturing that makes intelligent use of design and manufacturing data throughout its entire flow to help ensure that designs at 65 nanometers (nm) and smaller geometries will achieve desired yield goals.

Forward Looking Statements
This press release contains forward-looking statements within the meaning of the safe harbor provisions of Section 21E of the Securities Exchange Act of 1934, including statements regarding the expected benefits of the collaboration between Synopsys and Nikon to develop and deliver advanced lithography software models and DFM enabled lithography manufacturing solutions for 45 nm and below. These statements are based on Synopsys’ and Nikon’s current expectations and beliefs. The actual results of the collaboration could differ materially from those implied by these statements as a result of unforeseen difficulties encountered during the collaboration in developing solutions for very small geometry processes, uncertainties attendant to any new technology offering and certain statements contained in the section of Synopsys’ Quarterly Report on Form 10-Q for the fiscal quarter ended July 31, 2006 entitled “Factors That May Affect Future Results.”

###

Contact:
Bernie Wood
Director of Marketing
Nikon Precision Inc.,
(650) 413-8533 phone
bwood@nikon.com